The influence of initial impurities and irradiation conditions on defect production and annealing in silicon for particle detectors

Silicon detectors in particle physics experiments at the new accelerators or in space missions for physics goals will be exposed to extreme radiation conditions. The principal obstacles to long-term operation in these environments are the changes in detector parameters, consequence of the modifications in material properties after irradiation. The phenomenological model developed in the present paper is able to explain quantitatively, without free parameters, the production of primary defects in silicon after particle irradiation and their evolution toward equilibrium, for a large range of generation rates of primary defects. Vacancy-interstitial annihilation, interstitial migration to sinks, divacancy and vacancy-impurity complex (VP, VO, V2O, CiOi and CiCs) formation are taken into account. The effects of different initial impurity concentrations of phosphorus, oxygen and carbon, as well as of irradiation conditions are systematically studied. The correlation between the rate of defect production, the temperature and the time evolution of defect concentrations is also investigated.Comment: 14 pages, 8 figures, submitted to Nucl. Instrum. Meth. Phys. Res.

Lagrange formalism of memory circuit elements: classical and quantum formulations

The general Lagrange-Euler formalism for the three memory circuit elements, namely, memristive, memcapacitive, and meminductive systems, is introduced. In addition, {\it mutual meminductance}, i.e. mutual inductance with a state depending on the past evolution of the system, is defined. The Lagrange-Euler formalism for a general circuit network, the related work-energy theorem, and the generalized Joule's first law are also obtained. Examples of this formalism applied to specific circuits are provided, and the corresponding Hamiltonian and its quantization for the case of non-dissipative elements are discussed. The notion of {\it memory quanta}, the quantum excitations of the memory degrees of freedom, is presented. Specific examples are used to show that the coupling between these quanta and the well-known charge quanta can lead to a splitting of degenerate levels and to other experimentally observable quantum effects

Wide spectral photoresponse of layered platinum diselenide-based photodiodes

Platinum diselenide (PtSe2) is a group-10 transition metal dichalcogenide (TMD) that has unique electronic properties, in particular a semimetal-to-semiconductor transition when going from bulk to monolayer form. We report on vertical hybrid Schottky barrier diodes (SBDs) of two-dimensional (2D) PtSe2 thin films on crystalline n-type silicon. The diodes have been fabricated by transferring large-scale layered PtSe2 films, synthesized by thermally assisted conversion of predeposited Pt films at back-end-of-the-line CMOS compatible temperatures, onto SiO2/Si substrates. The diodes exhibit obvious rectifying behavior with a photoresponse under illumination. Spectral response analysis reveals a maximum responsivity of 490 mA/W at photon energies above the Si bandgap and relatively weak responsivity, in the range of 0.1–1.5 mA/W, at photon energies below the Si bandgap. In particular, the photoresponsivity of PtSe2 in infrared allows PtSe2 to be utilized as an absorber of infrared light with tunable sensitivity. The results of our study indicate that PtSe2 is a promising option for the development of infrared absorbers and detectors for optoelectronics applications with low-temperature processing conditions

Viscosity of erythritol and erythritol–water particles as a function of water activity: new results and an intercomparison of techniques for measuring the viscosity of particles

A previous study reported an uncertainty of up to 3 orders of magnitude for the viscosity of erythritol (1,2,3,4-butanetetrol)–water particles. To help reduce the uncertainty in the viscosity of these particles, we measured the diffusion coefficient of a large organic dye (rhodamine B isothiocyanate–dextran, average molecular weight  ∼ 70 000 g mol−1) in an erythritol–water matrix as a function of water activity using rectangular-area fluorescence recovery after photobleaching (rFRAP). The diffusion coefficients were then converted to viscosities of erythritol–water particles using the Stokes–Einstein equation. In addition, we carried out new viscosity measurements of erythritol–water particles using aerosol optical tweezers. Based on the new experimental results and viscosities reported in the literature, we conclude the following: (1) the viscosity of pure erythritol is 184−73+122&thinsp;Pa&thinsp;s (2 standard deviations); (2) the addition of a hydroxyl (OH) functional group to a linear C4 carbon backbone increases the viscosity on average by a factor of 27−5+6 (2 standard deviations); and (3) the increase in viscosity from the addition of one OH functional group to a linear C4 carbon backbone is not a strong function of the number of OH functional groups already present in the molecule up to the addition of three OH functional groups, but the increase in viscosity may be larger when the linear C4 carbon backbone already contains three OH functional groups. These results should help improve the understanding of the viscosity of secondary organic aerosol particles in the atmosphere. In addition, these results show that at water activity &gt; 0.4 the rFRAP technique, aerosol optical tweezers technique, and bead-mobility technique give results in reasonable agreement if the uncertainties in the measurements are considered. At water activity &lt; 0.4, the mean viscosity values determined by the optical tweezers technique were higher than those determined by the bead-mobility and rFRAP techniques by 1–2 orders of magnitude. Nevertheless, the disagreement in viscosity measured using multiple techniques reported in this paper is smaller than reported previously.</p

The potential use of service-oriented infrastructure framework to enable transparent vertical scalability of cloud computing infrastructure

Cloud computing technology has become familiar to most Internet users. Subsequently, there has been an increased growth in the use of cloud computing, including Infrastructure as a Service (IaaS). To ensure that IaaS can easily meet the growing demand, IaaS providers usually increase the capacity of their facilities in a vertical IaaS increase capability and the capacity for local IaaS amenities such as increasing the number of servers, storage and network bandwidth. However, at the same time, horizontal scalability is sometimes not enough and requires additional strategies to ensure that the large number of IaaS service requests can be met. Therefore, strategies requiring horizontal scalability are more complex than the vertical scalability strategies because they involve the interaction of more than one facility at different service centers. To reduce the complexity of the implementation of the horizontal scalability of the IaaS infrastructures, the use of a technology service oriented infrastructure is recommended to ensure that the interaction between two or more different service centers can be done more simply and easily even though it is likely to involve a wide range of communication technologies and different cloud computing management. This is because the service oriented infrastructure acts as a middle man that translates and processes interactions and protocols of different cloud computing infrastructures without the modification of the complex to ensure horizontal scalability can be run easily and smoothly. This paper presents the potential of using a service-oriented infrastructure framework to enable transparent vertical scalability of cloud computing infrastructures by adapting three projects in this research: SLA@SOI consortium, Open Cloud Computing Interface (OCCI), and OpenStack

Resonance properties and microstructure of ultracompliant metallic nanoelectromechanical systems resonators synthesized from Al-32 at. % Mo amorphous-nanocrystalline metallic composites

This study details the resonance properties of 20 nm thick nanoelectromechanical system scale cantilevers fabricated from a metallic Al-32 at. %Mo nanocomposite. The advantage of the Al-32 at. %Mo alloy is that its strength and near-atomic surface smoothness enable fabrication of single-anchored metallic cantilevers with extreme length-to-thickness ratios, as high as 400:1. This yields uniquely compliant structures with exquisite force sensitivity. For example, an 8 ??m long, 20 nm thick Al-32 at. %Mo device has a spring constant of K280 ??Nm. We show through transmission electron microscope analysis and continuum modeling that the relevant damping mechanisms are related to the device microstructure.open3

The Importance of Edge Effects on the Intrinsic Loss Mechanisms of Graphene Nanoresonators

We utilize classical molecular dynamics simulations to investigate the intrinsic loss mechanisms of monolayer graphene nanoresonators undergoing flexural oscillations. We find that spurious edge modes of vibration, which arise not due to externally applied stresses but intrinsically due to the different vibrational properties of edge atoms, are the dominant intrinsic loss mechanism that reduces the Q-factors. We additionally find that while hydrogen passivation of the free edges is ineffective in reducing the spurious edge modes, fixing the free edges is critical to removing the spurious edge-induced vibrational states. Our atomistic simulations also show that the Q-factor degrades inversely proportional to temperature; furthermore, we also demonstrate that the intrinsic losses can be reduced significantly across a range of operating temperatures through the application of tensile mechanical strain.Comment: 15 pages, 5 figures. Accepted for publication in Nano Letter

Performance of Monolayer Graphene Nanomechanical Resonators with Electrical Readout

The enormous stiffness and low density of graphene make it an ideal material for nanoelectromechanical (NEMS) applications. We demonstrate fabrication and electrical readout of monolayer graphene resonators, and test their response to changes in mass and temperature. The devices show resonances in the MHz range. The strong dependence of the resonant frequency on applied gate voltage can be fit to a membrane model, which yields the mass density and built-in strain. Upon removal and addition of mass, we observe changes in both the density and the strain, indicating that adsorbates impart tension to the graphene. Upon cooling, the frequency increases; the shift rate can be used to measure the unusual negative thermal expansion coefficient of graphene. The quality factor increases with decreasing temperature, reaching ~10,000 at 5 K. By establishing many of the basic attributes of monolayer graphene resonators, these studies lay the groundwork for applications, including high-sensitivity mass detectors

Optimized testing strategy for the diagnosis of GAA-FGF14 ataxia/spinocerebellar ataxia 27B

Dominantly inherited GAA repeat expansions in FGF14 are a common cause of spinocerebellar ataxia (GAA-FGF14 ataxia; spinocerebellar ataxia 27B). Molecular confirmation of FGF14 GAA repeat expansions has thus far mostly relied on long-read sequencing, a technology that is not yet widely available in clinical laboratories. We developed and validated a strategy to detect FGF14 GAA repeat expansions using long-range PCR, bidirectional repeat-primed PCRs, and Sanger sequencing. We compared this strategy to targeted nanopore sequencing in a cohort of 22 French Canadian patients and next validated it in a cohort of 53 French index patients with unsolved ataxia. Method comparison showed that capillary electrophoresis of long-range PCR amplification products significantly underestimated expansion sizes compared to nanopore sequencing (slope, 0.87 [95% CI, 0.81 to 0.93]; intercept, 14.58 [95% CI, − 2.48 to 31.12]) and gel electrophoresis (slope, 0.84 [95% CI, 0.78 to 0.97]; intercept, 21.34 [95% CI, − 27.66 to 40.22]). The latter techniques yielded similar size estimates. Following calibration with internal controls, expansion size estimates were similar between capillary electrophoresis and nanopore sequencing (slope: 0.98 [95% CI, 0.92 to 1.04]; intercept: 10.62 [95% CI, − 7.49 to 27.71]), and gel electrophoresis (slope: 0.94 [95% CI, 0.88 to 1.09]; intercept: 18.81 [95% CI, − 41.93 to 39.15]). Diagnosis was accurately confirmed for all 22 French Canadian patients using this strategy. We also identified 9 French patients (9/53; 17%) and 2 of their relatives who carried an FGF14 (GAA)≥250 expansion. This novel strategy reliably detected and sized FGF14 GAA expansions, and compared favorably to long-read sequencing